Welcome visitor you can login or create an account.
Posted by in DIY and Tutorials on June 08, 2015 . 0 Comments.

I have had so many questions and requests about this so finally I am going to let you all know how I made this dresser:

Upholstered IKEA Malm drawers

I made these quite a while ago, before baby 2 was born and absolutely love them. They are so bright and colorful I use them in heaps of my display shots for the artwork in my WallFry store and customers have been asking me where I got the dresser.

Sea Creatures (BRIGHT) set of 3

Wallfry Safari Series - Set of 4

So, this will be a restrospective tutorial and forgive me if I don't pull the things apart to show you the nuts and bolts, but hopefully you will get a good idea.

What you will need:

  • Dresser - (any set of drawers where the face of each drawer sits outside the drawer cavity)
  • Wadding - (I used thin pieces of Dacron)
  • Staple gun and staples - (I used an electronic staple gun because it was sooo much easier)
  • Fabric - (of your choice, match your bedding or color scheme, your options are endless)
  • Tape - (I used black duct tape which matches the drawers and has stayed secure)
  • Scissors

I started off with a set of Ikea Malm Drawers:

IKEA Malm drawers (set of 3)

Then some wadding:

 

  • Cut your wadding to the same size as the face of each drawer (it does not need to go around corners, this will be too bulky). You should have 3 rectangular pieces the same size. I only used quite a thin layer.
  • Cut your selected fabric larger than the drawer faces (leave enough space to come around the edges on every side, about 5cm). You don't need to cut any allowance for corners as you just fold these over like sheets on a bed when you attach them. If you cut them, they may fray.
  • Don't stick or glue your wadding to the drawers in any way. It isn't necessary and may make the wadding bumpy.
  • Lay out your rectangle of material on the table, then center a rectangle of wadding on top. Then place the drawer face down on top of the wadding.
  • Using your trusty staple gun, bring the edges of the fabric up onto the backside of the drawer and staple in place.

  • Fold the fabric over in a hem before stapling to prevent fraying. I used an electronic staple gun, but you can use a manual one too.

The backside of the drawers should look like this:

Detail - staples in drawers

You can see that my staple work is not that crash hot. This is ok, as long as the fabric is fixed securely, because you will cover it later with secure tape. You can see how I have done my corners too (like sheets on a mattress) they have held really well for the last 2 years.

  • Tape over the staples. This makes it look nicer but is also a good safety measure if any staples happen to come loose. Make sure you use a tape that will hold. I had previously used masking tape on another set of drawers and this has peeled off over time. The duct tape I have used on this set seems to have worked a dream.

When the tape is in place it looks like this:

Tape detail

It is really quick and easy too. I did this when I was 8 months pregnant (hey you get creative and industrious at the end of a pregnancy, I think it's called nesting) and got it done in one night.


I love them, they are so bright and colorful and still the highlight of the room.

Ikea MALM drawers hack

TAKE A MOMENT FOR SAFETY Take care when crafting and using things like staples around children. It is imperative that they are fixed securely and that your children are not allowed to play with the drawers unattended. Keep checking that your staples are safely secured over time, even as your children get older. Thanks!


I welcome your questions! If there is anything I haven't covered (no pun intended) then leave a comment. I read them all and will reply to any questions.

Comments

Leave a Comment

Leave a Reply

* Name:
* E-mail: (Not Published)
   Website: (Site url with http://)
* Comment:
Verification code:
View Mobile / Standard
payment methods
Powered By OpenCart
Wallfry.com | Wall Art for Small Fry © 2017